Find the right parts:
Leveling Kits, Suspensions, & More
Hell bent steel
FIT GUIDE
guaranteed satisfaction and correct fit
170-009-iso-bk
170-009-md-bk170-009-fr-bk
Dodge Ram 3500 4WD Steering Gear Box Stabilizer Bar 2009-2016 (Including Mega Cab models)
0 out of 5 based on 0 customer ratings
(0 customer reviews)
PART# 170-009-000

CHOOSE COLOR

Download Installation Instructions

The Hell Bent Steel Dodge Ram Steering Stabilizer Bar Kit is one of the best ways to protect and improve your truck’s steering. Dodge solid-front-axle trucks can develop steering “wander” due to the design of steering gear box. The stabilizer bar provides superior support for your gear box by adding a secondary fixed mount below the steering box.
Does not fit 2WD trucks and is not designed for Ram Powerwagons.

Specifications
Weight 15 lbs
Color Black, Blue, Red
Product Description

Hell Bent Steel Dodge Ram Steering Stabilizer Bar Kits are a must-have to keep your steering performing at optimum levels and to protect your investment. The design of the solid-axle Dodge truck’s steering gearbox is such that they have the tendency to wear out quickly. A worn out steering gearbox causes the “wander” in steering for which the Dodge Rams are notorious. Especially if you have a new steering box, you will want this bar kit to keep it strong. If you don’t stabilize your steering gear box, over time your truck will develop play in the steering; this can be, at best, annoying but potentially dangerous. The Hell Bent Steel steering stabilizer bar kit is complete, easy to install, great looking and the HIGHEST QUALITY stabilizer bar on the market. We also use an industry-leading powder coating that keeps it looking good for years to come. All of our products have an attention-to-detail quality and durability that you do not get from other manufacturers.

In a stock solid-axle Dodge Ram, as the wheels turn left and right, the sector shaft of the steering box is loaded and unloaded from side to side. This sideways loading will, over time, wear out the internal components of your steering box, causing it to fail. The HBS Dodge Ram Steering Stabilizer Bar Kit adds a mount to the bottom of your steering box, below your steering arm, that slides into a bearing housing that attaches to your truck’s frame. This bearing carries the side-acting loads which allows the shaft to move freely, adds strength and dramatically extends the life of the gearbox.

Installation of the Dodge Ram steering stabilizer bar takes 1-2 hours, though certified mechanics report installing in 30 minutes or less. The Dodge Ram steering stabilizer bar kit is complete with instructions and all necessary hardware at OEM Grade or higher. Hell Bent Steel always recommends that a certified mechanic install our products; however, many customers choose to performed the installation at home with basic shop tools.

All Hell Bent Steel products are manufactured with strength and durability that allows them to have a limited lifetime warranty. We also offer 100% satisfaction.

IMPORTANT NOTE:
The HBS Dodge Ram Steering Stabilizer Bar Kit is not intended or designed to be used as a replacement for a worn-out gearbox or other steering components. The stabilizer bar kit will improve handling and extend the life of a properly functioning steering gearbox. If your steering box is worn out, we strongly suggest replacing it, and also installing the stabilizer bar kit to make sure your steering remains safe and your box lasts as long as your truck.
Specifications:

Bearing mounting plate is constructed from heavy-duty 1/4″ thick steel.
Bar is constructed from heavy-wall steel tube.
Sector shaft nut is CNC machined from high-strength steel.
High-grade (Grade 10.9 metric and/or GR 8 standard) hardware is included with each kit.
Detailed installation instructions included.
Simple bolt-on installation for immediate results.
The stabilizer bar kit can be used on any stock Ram truck, most lifted or modified trucks, or in combination with other HBS Dodge Ram suspension products.

Customer Reviews

There are no reviews yet.

Specifications
Specifications
Weight 15 lbs
Color Black, Blue, Red
Product Description
Product Description

Hell Bent Steel Dodge Ram Steering Stabilizer Bar Kits are a must-have to keep your steering performing at optimum levels and to protect your investment. The design of the solid-axle Dodge truck’s steering gearbox is such that they have the tendency to wear out quickly. A worn out steering gearbox causes the “wander” in steering for which the Dodge Rams are notorious. Especially if you have a new steering box, you will want this bar kit to keep it strong. If you don’t stabilize your steering gear box, over time your truck will develop play in the steering; this can be, at best, annoying but potentially dangerous. The Hell Bent Steel steering stabilizer bar kit is complete, easy to install, great looking and the HIGHEST QUALITY stabilizer bar on the market. We also use an industry-leading powder coating that keeps it looking good for years to come. All of our products have an attention-to-detail quality and durability that you do not get from other manufacturers.

In a stock solid-axle Dodge Ram, as the wheels turn left and right, the sector shaft of the steering box is loaded and unloaded from side to side. This sideways loading will, over time, wear out the internal components of your steering box, causing it to fail. The HBS Dodge Ram Steering Stabilizer Bar Kit adds a mount to the bottom of your steering box, below your steering arm, that slides into a bearing housing that attaches to your truck’s frame. This bearing carries the side-acting loads which allows the shaft to move freely, adds strength and dramatically extends the life of the gearbox.

Installation of the Dodge Ram steering stabilizer bar takes 1-2 hours, though certified mechanics report installing in 30 minutes or less. The Dodge Ram steering stabilizer bar kit is complete with instructions and all necessary hardware at OEM Grade or higher. Hell Bent Steel always recommends that a certified mechanic install our products; however, many customers choose to performed the installation at home with basic shop tools.

All Hell Bent Steel products are manufactured with strength and durability that allows them to have a limited lifetime warranty. We also offer 100% satisfaction.

IMPORTANT NOTE:
The HBS Dodge Ram Steering Stabilizer Bar Kit is not intended or designed to be used as a replacement for a worn-out gearbox or other steering components. The stabilizer bar kit will improve handling and extend the life of a properly functioning steering gearbox. If your steering box is worn out, we strongly suggest replacing it, and also installing the stabilizer bar kit to make sure your steering remains safe and your box lasts as long as your truck.
Specifications:

Bearing mounting plate is constructed from heavy-duty 1/4″ thick steel.
Bar is constructed from heavy-wall steel tube.
Sector shaft nut is CNC machined from high-strength steel.
High-grade (Grade 10.9 metric and/or GR 8 standard) hardware is included with each kit.
Detailed installation instructions included.
Simple bolt-on installation for immediate results.
The stabilizer bar kit can be used on any stock Ram truck, most lifted or modified trucks, or in combination with other HBS Dodge Ram suspension products.

Reviews (0)
Customer Reviews

There are no reviews yet.

Find the right parts for your truck. Fast & Easy
Find Your Truck Model
give us a call with questions: (877) 731-7911