Regular Price: $94.00

Special Price: $74.00

Availability: In stock

confidence Bill Me Later

Free Shipping

Hell Bent Steel 100% Satisfaction Guarantee

Isometric View

Click on above image to view full picture

  • Isometric View
  • Front Right View
  • Detail View
  • Toyota Tacoma Leveling Lift Kit Install

1996-2004 2" Toyota Tacoma Leveling Lift Kit

Quick Overview

2" Toyota Tacoma Leveling Kit for all independent suspension (6-lug) models (1996-2004)


Installing the HBS strut extension spacer will lift the front of your truck to allow up to 32" tires. The spacers simply bolt onto the strut cap, and will not deteriorate or decrease in height over time.


CLICK HERE FOR INSTALLATION INSTRUCTIONS
Part Number: 410-200-001

Does not fit 5-lug models

Description

  • The 3/16" hot P.O. steel plate is precision CNC cut.
  • Our heavy wall tubing is a superior load-bearing member to ensure maximum stability.
  • We use OEM style GRADE 8 studs, which are much stronger than grade 5 as seen in similar Toyota Tacoma leveling kits.
  • Our robotic-pulsed welding produces an aerospace grade weld that is higher quality than the short arc weld found on similar products. The spacer is welded all the way around on the outside diameter of the tubing, rather than being skip welded by hand on the inside. There is no chance of the welds interfering with the strut in any way.
  • The powder coating finish has been specially formulated for this product application. Paint just won't cut it!
  • OEM toplock flange nuts are included with every kit to ensure a proper torque specification can be met on install and maintained over time.

Additional Information

  • No other manufacturer has a stronger commitment to quality and value. The Hell Bent Steel Toyota Tacoma leveling kit is easy to install in 1-2 hours. The design and construction of the leveling kits make it safe to install and use. The spacers will not add excessive pressure or cause premature wear to your suspension. Hell Bent Steel offers a lifetime guarantee on the design and construction of all their products and would put them up next to any similar product on the market.

*Please Note: The thickness of the spacer is 1.060". Due to the design of the independent suspension of the truck, when you extend the strut by 1.060” the angle of the strut becomes steeper allowing the truck to experience approximately 2” of lift. It is the combination of extending the strut and the change in angle that gives the 2” lift. Remember that the installation is not complete until you have had the truck realigned. This is when you will see the true 2" lift that you are expecting.


This Toyota Tacoma leveling kit fits the following models:


1996 Toyota Tacoma 4X4 4wd / 4X2 2wd trucks (6 lug models)
1997 Toyota Tacoma 4X4 4wd / 4X2 2wd trucks (6 lug models)
1998 Toyota Tacoma 4X4 4wd / 4X2 2wd trucks (6 lug models)
1999 Toyota Tacoma 4X4 4wd / 4X2 2wd trucks (6 lug models)
2000 Toyota Tacoma 4X4 4wd / 4X2 2wd trucks (6 lug models)
2001 Toyota Tacoma 4X4 4wd / 4X2 2wd trucks (6 lug models)
2002 Toyota Tacoma 4X4 4wd / 4X2 2wd trucks (6 lug models)
2003 Toyota Tacoma 4X4 4wd / 4X2 2wd trucks (6 lug models)
2004 Toyota Tacoma 4X4 4wd / 4X2 2wd trucks (6 lug models)

Customer Reviews

  • 1996-2004 2" Toyota Tacoma Leveling Lift Kit (1/16/12)
    Review by joe
    Stars
    5
    Very easy install for the shadetree mechanis! Excellent quality product.

Write Your Own Review

  1 star 2 stars 3 stars 4 stars 5 stars
Stars

Additional Information

Product Type LEVELING KIT TOYOTA TACOMA
Shipping Group LEVELING KIT TOYOTA TACOMA