Why do I need a Dodge Ram steering stabilizer bar?
HELL BENT STEEL Dodge Ram Steering Stabilizer Bar Kits are a must-have to keep your steering performing at optimum levels and to protect your investment. The design of the solid-axle Dodge truck's steering gearbox is such that they have the tendency to wear out quickly. A worn out steering gearbox causes the "wander" in steering for which the Dodge Rams are notorious. Especially if you have a new steering box, you will want this bar kit to keep it strong. If you don't stabilize your steering gear box, over time your truck will develop play in the steering; this can be, at best, annoying but potentially dangerous. The Hell Bent Steel steering stabilizer bar kit is complete, easy to install, great looking and the HIGHEST QUALITY stabilizer bar on the market. We also use an industry-leading powder coating that keeps it looking good for years to come. All of our products have an attention-to-detail quality and durability that you do not get from other manufacturers.
What is a Dodge Ram steering stabilizer bar kit and how does it work?
In a stock solid-axle Dodge Ram, as the wheels turn left and right, the sector shaft of the steering box is loaded and unloaded from side to side. This sideways loading will, over time, wear out the internal components of your steering box, causing it to fail. The HBS Dodge Ram Steering Stabilizer Bar Kit adds a mount to the bottom of your steering box, below your steering arm, that slides into a bearing housing that attaches to your truck's frame. This bearing carries the side-acting loads which allows the shaft to move freely, adds strength and dramatically extends the life of the gearbox.
How do I know if I have an original steering box, or if the dealer might have replaced it?
If your truck has had an upgraded box installed by a Dodge dealer, it will have the 1-1/4" main shaft instead of the 7/8" shaft supplied by the factory on 03-08 Dodge 2500/3500 4WD Rams. If this is the case, this kit will not fit your truck. Please call (1.877.731.7911) if you have any questions about proper fitment; we have techs available for guidance.
How difficult is it to install the Hell Bent Steel Dodge Ram Stabilizer Bar Kit?
It is fairly easy to install the Dodge Ram steering stabilizer bar kit in 1-2 hours at most, and many of our customers report installing in 30 minutes or less. The Dodge Ram Stabilizer Bar Kit is complete with instructions and all necessary hardware at OEM Grade 10.9 specification. Hell Bent Steel always recommends that a certified mechanic install all of our products; however, many customers report that they performed the installation at home with basic shop tools.
What is the warranty for the steering stabilizer bar kit?
All Hell Bent Steel products are manufactured with strength and durability that allows them to have a limited lifetime warranty. We also offer 100% satisfaction. For more details, see our policies page.
The HBS Dodge Ram Steering Stabilizer Bar Kit is not intended or designed to be used as a replacement for a worn-out gearbox or other steering components. The stabilizer bar kit will improve handling and extend the life of a properly functioning steering gearbox. If your steering box is worn out, we strongly suggest replacing it, and also installing the stabilizer bar kit to make sure your steering remains safe and your box lasts as long as your truck.
The stabilizer bar kit can be used on any stock Ram truck, most lifted or modified trucks, or in combination with other HBS Dodge Ram suspension products:
- Bearing mounting plate is constructed from heavy-duty 1/4" thick steel
- Bar is constructed from heavy-wall steel tube
- Sector shaft nut is CNC machined from high-strength steel
- High-grade (Grade 10.9 metric or higher) hardware is included with each kit
- Detailed installation instructions included
- Simple bolt-on installation for immediate results
This kit fits the following models:
: If your truck has had an upgraded box installed by your Dodge dealer, it will likely have the 1-1/4" main shaft instead of the 7/8" shaft supplied by the factory on 03-08 Dodge 2500/3500 4WD Rams. This kit will not fit your truck
. Please contact us prior to ordering if you are unsure.
2003 Dodge Ram 2500 / 3500 4X4 4wd trucks
2004 Dodge Ram 2500 / 3500 4X4 4wd trucks
2005 Dodge Ram 2500 / 3500 4X4 4wd trucks
2006 Dodge Ram 2500 / 3500 4X4 4wd trucks
2006 Dodge Ram 2500 / 3500 and 1500 Mega cab 4X4 4wd trucks
2007 Dodge Ram 2500 / 3500 4X4 4wd trucks
2007 Dodge Ram 2500 / 3500 and 1500 Mega cab 4X4 4wd trucks
2008 Dodge Ram 2500 / 3500 4X4 4wd trucks
2008 Dodge Ram 2500 / 3500 and 1500 Mega cab 4X4 4wd trucks